Note: Doors are heavy; use caution when removing them.
Turn the ignition to the accessory mode position.
Fully open the windows on the doors being removed.
Turn the ignition to the off position.
Fold mirrors forward completely before removing the front doors.
Fully open the door being removed.
Locate the fender and door protectors in the tool pouch; install one over the fender edge near the upper door hinge and the other on the door edge near the bottom door hinge; see your Owner’s Manual for specific placement.
Open the wire connector door to release the connector, then pull the connector from the body.
Make sure the connector door is seated in the closed position.
Place the door storage bag on the door being removed, if equipped.
Using the provided hex tool, loosen and remove the lower hinge bolt.
Loosen and remove the upper hinge bolt.
Lift the door vertically, using the lower lift handle and exterior door handle to separate it from the vehicle.
Secure bag by zipping it shut.